Description
If you are looking for the RH mode switch like used on the WSBK race bikes, these are the ones. This is pure WSBK exotica. This mode switch is for race only use and eliminates the stock LH switch group entirely.
The switch body is made from 6061 Aluminium, anodised black, laser etched. Buttons are waterproof, enterย and start buttons are momentary contact type and the Up/Down Selection and ย On/Kill button areย ofย latching type.
The wiring is plug and play. You can remove your OEM right handย switchgroup and replace it with this unit. No wire cutting or splicing is required. Kit includes brake switch connectors to allow brake light to be activate with the use of the front brake.
To scroll up button 2 (Up/Down Selection) needs to be depressed then button 4 (SCROLL) ย is used to scroll down through the menu
To scroll down button 2 (Up/Down Selection) needs to be pressedย then button 4 (SCROLL) ย is used to scroll upย through the menu
Enter is like pressing the scroll wheel.
Start and Run / kill are the same as the standard switches.
Both right and left hand side OEM controls are very prone to failure, replace yours now to avoid disappointment!
NOTE:This switch may not be road legal in your country , please refer to your countries road vehicle design rules prior to installation!!
